Gigabyte GA-6OMM7E User Manual page 66

6OMM7E Motherboard
UART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR Set onboard I/O chip UART to ASKIR Mode.
IrDA Set onboard I/O chip UART to IrDA Mode.
SCR Set onboard I/O chip UART to SCR Mode.
Set onboard I/O chip UART to Normal. (Default Value)
Normal
UR2 Duplex Mode
Half
Full
Onboard Parallel port
Enabled onboard LPT port and address is 378/IRQ7. (Default Value)
378/IRQ7
278/IRQ5 Enabled onboard LPT port and address is 278/IRQ5.
Disabled Disabled onboard LPT port.
3BC/IRQ7 Enabled onboard LPT port and address is 3BC/IRQ7.
Parallel Port Mode
Using Parallel port as Standard Parallel Port. (Default Value)
SPP
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as ECP & EPP mode.
AC Back Function
Memory This function depends on computer status.
Set System Soft-Off Status. (Default value)
Soft-Off
Full-On Set System Full-On Status.
Game Port Address
Disabled Disabled this function.
Set onboard game port is 201. (Default Value)
201
209 Set onboard game port is 209.
Midi Port Address
Disabled Disabled On Board Midi Port.
300 Set On Board Midi Port is 300.
Set On Board Midi Port is 330. (Default Value)
330
IR Function Duplex Half. (Default Value)
IR Function Duplex Full.
59