Gigabyte GA-6BX7+ User Manual page 30

Step 2:
To use STR Function, you will need to set motherboard jumpers JP13 &
JP17 closed per the figure below (i.e., put a jumper over both pins at
each location).
If you use INTEL i740 Chipset
AGP Card, please set jumper JP17
/JP13 "OPEN", because i740 not
support STR Function.
Step 3:
Power on the computer and as soon as memory counting starts, press <Del>.
You will enter BIOS Setup. Select the item "POWER MANAGEMENT
SETUP", then select "ACPI Suspend Type: Suspend to RAM". Remember
to save the settings by pressing "ESC" and choose the "SAVE & EXIT
SETUP" option.
Congratulation! You have completed the installation and now can use the STR
function.
JP17
PIN No. Function
1
1
Signal
2 GND
GA-6BX7+
PIN No. Function
JP13
1
1
Signal
2 GND
28
Suspend to RAM Installation