Samsung WA12GP User Manual page 14

setting up your washer
DELAY START
How to reserve washing?
Select this program when you have to go out or do something else.
1. Press the Power button to "On".
2. Press the Delay Start button once.
You may change the delay start time with use the Delay Start button. (from 3 hours to 19
hours)
3. Press the Start/Pause button and put the proper amount of detergent into tub.
4. Close the lid.
The washing finishes by the time you reserved. Add detergent and softener in proportion to
the water level. Then, close the lid.
•
•
•
•
CHILD LOCK
This function is for protecting children, the elderly and the frail.
1. Press the Power button.
2. To activate the Child Lock function, press and hold both the Rinse and Spin buttons down
simultaneously for 3 seconds. (If the Child Lock function is activated, the Child Lock icon blinks.)
3. Operations after activating the Child Lock function.
•
•
•
4. To deactivate the Child Lock function, press and hold both the Rinse and Spin buttons simultaneously
for 3 seconds again. (If the Child Lock function is deactivated, the Child Lock icon is turned off.)
5. To clear "CL" display, after draining is complete, close the door of the washing turn the
power off and then on.
-
CAUTION
-
-
-
14_setting up your washer
WA13GPBIC-02962C-01_EN.indd 14
Must add the detergent in the detergent box.
If the detergent is spread on the laundry directly, some clothes may get discolored as
the start delays.
If the Delay Start needs to be canceled, press the Power button.
The reserved finish time may be changed depends on the water pressure.
Even if the Child Lock function is activated, every button works until the door opens.
When you open the door during the Child Lock is being activated, the alarm sounds
and an error message appears. In 30 seconds, draining begins automatically. However,
if you close the door within 30 seconds, water will not be drained. (Displayed error
message " CL", " dE ").
To add laundry after activating the Child Lock function, you must deactivate the Child
Lock function.
This function is for preventing injury and malfunction of the product because of
inappropriate operations or actions by children, the elderly or the frail.
If the door opens when the Child Lock function is activated, the water is drained by
force to prevent children from drowning.
To add laundry after activating the Child Lock function, you must deactivate the Child Lock.
Even if the power is turned off and then on when the Click Lock is activated, the Child
Lock remains activated.
- Once Child Lock is activated, even when the power is turned off, if the door is
opened, water is automatically drained in 30 seconds.
- The Child Lock function cannot be deactivated when CL is displayed. (However, the
Child Lock function can be deactivated when the dE error is displayed.)
2011-09-15 12:00:06