Table of Contents
Advertisement
USB Device Wake-Up From S3
Disabled
Disable this function. (Default value)
Enabled
Enable USB device wake up system from S3 suspend type.
Power LED in S1 state
Blinking
The Power LED will be blinking during S1 state. (Default value)
Dual/OFF
The Power LED will be turned off or change color.
Soft-Off by PWRBTN
Instant -Off
Once a user presses the power button, the system will be turned off instantly.
(Default Value)
Delay 4 Sec
Press power button for 4 seconds to turn off the system. System enters suspend
mode if the power button is pressed for less than 4 seconds.
AC BACK Function
Soft-Off
When AC-power back to the system, the system will be in "Off" state.
(Default value)
Full-On
When AC-power back to the system, the system always in "On" state.
Memory
When AC-power back to the system, the system will return to the Last state
before AC-power off.
Keyboard Power On
Keyboard 98
If your keyboard has a "Power" button, enable this function to press the button to
turn off the system.
Password
Input password (from 1 to 8 characters) and press Enter to set the Keyboard
Power On Password.
Disabled
Disable this function. (Default Value)
Mouse Power On
Enabled
Enable to power on system by mouse event.
Disabled
Disable this function. (Default Value)
PME Event Wake Up
Disabled
Disable this function.
Enabled
Enable PME Event Wake up. (Default Value)
ModemRingOn/WakeOnLan (When AC Back Function set to [Soft-Off])
Disabled
Disable Modem Ring On/Wake On LAN function.
Enabled
Enable Modem Ring On/Wake On LAN function. (Default Value)
Resume by Alarm
You can enable Resume by Alarm and key in month/date/time to turn on system.
Disabled
Disable this function. (Default Value)
Enabled
Enable alarm function to POWER ON system.
If Resume by Alarm is Enabled.
Date (of Month) Alarm: Everyday, 0~31
Time ( hh: mm: ss) Alarm: (0~23) : (0~59) : (0~59)
- 31 -
BIOS Setup
Advertisement
Table of Contents
