Gigabyte 8I845GVM-RZ User Manual page 15

7) F_PANEL (2 x 10 pins Connector)
Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassisfront
panel to the F_PANEL connector according to the pin assignment below.
HD (IDE Hard Disk Active LED)
SPK (Speaker Connector)
RES (Reset Switch)
PW (Soft Power Connector)
MSG (Message LED/ Power/ Sleep LED)
NC
8) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off.
It will blink when the system enters suspend mode.
Message LED/Power/
Soft Power
Sleep LED
Connector
Speaker Connector
IDE Hard Disk Reset Switch
Active LED
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Reset Hardware System
Open: Normal Operation
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
Pin No.
1
1
2
3
- 15 -
Definition
MPD+
MPD-
MPD-
Hardware Installation Process