Gigabyte G-MAX N601 User Manual page 3

If you use an extension cable with your AC adapter, ensure that the total
ampere rating of the products plugged in to the extension cable does not
exceed the ampere rating of the extension cable.
To remove power from your notebook, turn it off, disconnect the AC
adapter from the electrical outlet, and remove the battery.
To help avoid the potential hazard of electric shock, do not connect or
disconnect any cables or perform maintenance or reconfiguration of this
product during an electrical storm.
Do not dispose of batteries in a fire. They may explode. Check with local
authorities for disposal instructions.
When setting up your notebook for work, place it on a level surface.
When traveling, do not check your notebook as baggage. You can put your
notebook through an X-ray security machine, but never put your notebook
through a metal detector. If you have your notebook checked by hand, be
sure to have a charged battery available in case you are asked to turn on
your notebook.
When traveling with the hard drive removed from your notebook, wrap the
drive in a non-conducting material, such as cloth or paper. If you have the
drive checked by hand, be ready to install the drive in your notebook. Your
can put the hard drive through an X-ray security machine, but never put
the drive through a metal detector.
When traveling, do not place your notebook in overhead storage
compartments where it could slide around. Do not drop your notebook or
subject it to other mechanical shocks.
Protect your notebook, battery, and hard drive from environmental
hazards such as dirt, dust, food, liquids, temperature extremes, and
overexposure to sunlight.
When you move your notebook between environments with very different
temperature and/or humidity ranges, condensation may form on or within
your notebook. To avoid damaging your notebook, allow sufficient time for
the moisture to evaporate before using your notebook.
NOTICE: When taking your notebook from low-temperature
conditions into a warmer environment or from high-temperature
conditions into a cooler environment, allow your notebook to
acclimate to room temperature before turning on power.
When you disconnect a cable, pull on its connector or on its strain relief
loop, not on the cable itself. As you pull out the connector, keep it evenly
aligned to avoid bending any connector pins. Also, before you connect a
cable make sure both connectors are correctly oriented and aligned.
Before you clean your notebook, turn it off, unplug it from its power source,
and remove the battery.
G-MAX
III
TM
N601 User's Manual