Konica Minolta bizhub PRO C5501 User Manual page 283

Application functions
– To specify the erase amount for Center Erase:
Confirm that the center erase amount in the illustration is highlighted. If not, touch [Center] on the
right side of the screen to highlight it.
Use [,] and [+], or touch panel keypad to enter the desired erase amount.
6
Touch [OK] to complete the setting.
– To restore the previous setting, touch [Cancel].
– To release the Frame Center Erase function with the current setting remained, touch [Function Off].
7
Touch [OK] on the Application Screen.
The Copy Screen will be restored, with highlighted [Frame/Fold] key displayed under the [Application]
key.
Use this key to jump to the subsequent screen to make any setting change.
8
Enter the desired print quantity from the control panel keypad, then press [Start].
The machine will start printing when ready for output.
bizhub PRO C5501
11
11-41