Konica Minolta bizhub PRO C5501 User Manual page 104

5
Limited use of the copier in trouble
If the message shown below is displayed on the Call for Service Screen, you may continue operating the
copier on a limited function basis and utilize the trays and ADU that are not affected by the trouble. To obtain
this limited functionality of the copier, consult your service representative. Be sure to utilize the limited
function only temporarily, and arrange for machine repair immediately.
1
If the limited use of the copier is available, the following message is displayed in the message area
instead of the report code.
ex.
-- Tray 2 failure --
Press Reset to select except this tray
2
Press [Reset] on the control panel.
– Make note of the report code.
Please switch Off/On
C-0202
3
Turn OFF then ON the sub power switch.
A copying job can continue without using the troubled portion of the machine (ex. Tray 2).
7 CAUTION
Precaution for limited use
The machine should not keep operating by limited use for long time.
% Be sure to contact your service representative immediately when the Call for Service Screen is
displayed.
5-4
Troubleshooting
bizhub PRO C5501