Connectivity - Sharp WX-T923 User Manual

Connectivity

(M 12)
By configuring the settings in this menu, you can
connect to Bluetooth wireless technology or infrared
enabled phones, as well as PCs (USB connection is
possible using Data Cable accessory).
Bluetooth
(M 12-1)
For using the Bluetooth wireless function, you need to
search for other Bluetooth wireless technology enabled
devices to establish contact with your phone. Keep your
phone within a distance of 10 metres from the devices
before searching.
Using the Bluetooth Wireless Function
To Turn On or Off the Bluetooth Wireless Function
(M 12-1-1)
→
"Connectivity" "Bluetooth"
1.
Select "On" or "Off".
When "On" is selected, the Bluetooth wireless
setting is activated, and " " is displayed.
156 Connectivity
→
"Switch On/Off"
To Search for Devices to be Paired
A maximum of 16 devices can be searched for.
→
"Connectivity" "Bluetooth"
Devices"
1.
Select the desired device for pairing.
2.
Enter the device passcode.
Note
• You can search for devices even when the Bluetooth
wireless function is off. Once pairing is started, the
phone turns the Bluetooth wireless function on
automatically.
• You can only select one device for pairing. To change
the paired device, see "To Activate the Paired
Device" on page 157.
• Pairing means authentication has been established
between the two devices.
• In order to pair two devices with Bluetooth wireless
technology, the users should agree on the same
passcode for both devices.
• The passcode is used only once, so there is no need to
remember it. The passcode can be different each time
the devices are connected.
• Devices that do not have a user interface (i.e.,
headsets and car kits) have a factory-set passcode.
See the user guide for the device.
(M 12-1-2)
→
"Search for