Settings; Connectivity - Sharp HRO00058 User Manual

Settings

(M 9)

Connectivity

(M 9-1)
By configuring the settings in this menu, you can
connect to Bluetooth wireless technology enabled
phones, as well as PCs (USB connection is possible
using the optional Data Cable accessory).
Using the Bluetooth Wireless Function
To Turn On or Off
→
"Settings" "Connectivity"
"Switch On/Off"
1.
Select "On" or "Off".
When you select "On", the Bluetooth wireless
setting is activated and " " is displayed.
Tip
• You can turn the Bluetooth wireless function on or off
by pressing e, then R during standby.
98 Settings
(M 9-1-1)
→ →
"Bluetooth"
To Search for Devices to be Paired
For using the Bluetooth wireless function, you need to
search for other Bluetooth wireless technology enabled
devices to establish contact with your phone. Keep your
phone within a distance of 10 metres from the devices
before searching.
→
"Settings" "Connectivity"
1.
Select "Search for Devices".
The phone starts searching for devices within 10
metres.
2.
Select the desired device for pairing.
3.
Enter the device passcode.
Note
• Pairing means "Authentication".
• The users of two devices with Bluetooth wireless
technology should agree on the same passcode for
both devices in order to pair them.
• The passcode is used just once, there is no need to
remember it. The passcode can be different each time
the devices are connected.
→
"Bluetooth"