Sharp WX-T923 User Manual page 137

Power On/Off Sound
Your phone can be set to emit a sound when it is
switched on or off.
→
"Settings" "Phone Settings" tab
→
Settings" "System Sounds"
1.
Select "Power On Sound" or "Power Off Sound".
2.
Select "Sound" or "Duration".
For "Sound", select "Preset Sounds", "Sound
Gallery" or "Off".
For "Duration", enter the desired duration of sound
in 2 digits using the digit keys.
Handset Open/Close Sound
Your phone can be set to emit a sound when it is opened
or closed.
→
"Settings" "Phone Settings" tab
→
Settings" "System Sounds"
1.
Select "Handset Open" or "Handset Close".
2.
Select "Sound" or "Duration".
For "Sound", select "Preset Sounds", "Sound
Gallery" or "Off".
For "Duration", select the desired time.
136 Settings
Charge Full
Your phone can be set to emit a sound when it is fully
charged.
→
"Sound "Settings"
Settings"
1.
Vibration
"Settings"
Settings"
1.
→
"Sound
2.
3.
Tip
• When you select "On" for "For Incoming Call",
→
"Phone Settings" tab
→
"System Sounds"
Select "Sound" or "Duration".
For "Sound", select "Preset Sounds", "Sound
Gallery" or "Off".
For "Duration", select the desired time.
(M 9-4-4)
→
"Phone Settings" tab
→
"Vibration"
Select "For Incoming Call", "For New Message",
"Java Start" or "Delivery Report".
Select "Switch On/Off" and then select "On" or
"Link to Sound" to activate.
Select "Vibration Pattern" and then select the
desired vibration pattern.
" " or " " is displayed in stand-by.
→
"Sound
→
"Charge Full"
→
"Sound