Adjusting The Network Settings - Vizio D50-F1 User Manual

ADJUSTING THE NETWORK SETTINGS

Your TV is Internet-ready, featuring both an Ethernet port and
built-in high-speed Wireless-Network.
If your TV is connected to a network with an Ethernat
cable, you will not see the wireless network connection
menu. You must unplug the Ethernet cable to set a
wireless network connection.
Connecting to a Wireless Network
To connect to a wireless network
whose network name (SSID) is being
broadcast:
1. Press the Menu button on the
remote. The on-screen menu is
Network
displayed.
Wired Connection
2. Use the Arrow buttons on the
Wireless Access Points
remote to highlight Network and
press OK. The NETWORK menu is
displayed.
3. If you do not see your wireless Manual Setup
network displayed, highlight More
Hidden Network
Access Points and press OK. The
Test Connection
WIRELESS ACCESS POINTS menu,
which is a list of available wireless
networks, is displayed.
4. Highlight the name of your
Press OK to select your wireless access point
wireless network (this is the
network's SSID) and press OK.
5. Using the on-screeen keyboard,
enter your network's password,
then highlight Connect and press
OK.
6. Press the Exit button on the
remote.
Changing the Manual Setup Settings
Advanced users can fine-tune the network settings using the Manual
Setup feature.
To change advanced network settings:
1. From the NETWORK menu,
highlight Manual Setup and press
OK. The MANUAL SETUP menu is
displayed.
2. To change the settings manually,
use the Arrow buttons on the
remote to highlight DHCP and then
use the Left/Right Arrow buttons to
change the setting to Off.
3. Use the Arrow and OK buttons to
Back
adjust each setting:
Disconnected
• IP Address - The IP address
assigned to the TV.
• Subnet Mask - The subnet Exit 2D.
• Default Gateway - Your network's
default gateway address.
• Pref. DNS Server - Your preferred domain name server
address.
• Alt. DNS Server - Your alternate domain name server address.
4. Use the Arrow buttons on the remote to highlight Save and press
OK.
5. Press the Exit button on the remote.
.
Finding MAC Addresses for Network Setup
The security settings on your router may require you to enter the
TV's MAC address in the router's settings.
To find the TV's MAC address:
Manual Setup 1. From the NETWORK menu, highlight Manual Setup and press OK.
Back
The MANUAL SETUP menu is displayed.
DHCP Off
IP Address __.__.__.__
2. Find the MAC address for the TV at the bottom of the list. The MAC
Subnet Mask __.__.__.__
addresses for the connections in use are displayed:
Default Gateway __.__.__.__
• RJ45 MAC - The Ethernet or RJ45 MAC address may be
Pref. DNS Server __.__.__.__
needed to set up your network when you have connected
Alt. DNS Server __.__.__.__
the TV to your network when you have connected the TV to
RJ45 MAC 0:0:0:0:0:0
your network with an Ethernet (Cat 5) cable.
Wireless MAC 0:0:0:0:0:0
• Wireless MAC - The Wireless (WiFi) MAC address may be
needed to connect your TV to your network with WiFi.
Save
Cancel
3
22