Yaesu FTdx5000MP Operating Manual page 26

F P
RONT ANEL
A B Switch
Press this button briefly to transfer data from the VFO-
A frequency (or a recalled memory channel) to VFO-
B, overwriting any previous contents in VFO-B. Use
this button to set both VFO-A and VFO-B receivers to
the same frequency and mode.
A B Switch
Pressing this button briefly, exchanges the contents of
the VFO-A (or a recalled memory channel) and the
VFO-B.
V/M Switch
This button toggles VFO-A receiver operation between
the memory system and the VFO. Either "
" " will be displayed under the main frequency
display field to indicate the current selection. If you
have tuned off of a Memory channel frequency (MT),
pressing this button returns the display to the original
memory contents (MR), and pressing it once more re-
turns operation to VFO-A (no icon).
M A Switch
Press this button briefly, to display the contents of the
currently-selected memory channel for three seconds.
Holding this button in for 2 seconds copies the data
from the currently-selected memory to VFO-A, as two
beeps sound. Previous data in VFO-A will be over-
written.
Page 24
C
ONTROLS
" or
& S
WITCHES
A M Switch
Pressing and holding in this button for 1/2 second (un-
til the double beep), copies the current operating data
from VFO-A into the currently selected memory chan-
nel, overwriting any previous data stored there. See
page 102 for details.
Also, pressing and holding in this button after recall-
ing a memory, without first retuning, causes the memory
channel to be "masked," and repeating the process re-
stores the masked memory.
MENU Switch
This button is used to access the Menu system, for con-
figuring various transceiver characteristics. Menu op-
eration is described in detail, in this manual, begin-
ning on page 116.
I N :
MPORTANT OTE
Pressing this button briefly activates the Menu, and
the Menu items will appear on the SUB DISPLAY
windows. Once you are finished, you must press and
hold in the [ MENU ] button for two seconds to save
any configuration changes (briefly press the [ MENU ]
button to exit without saving the changes).
FT 5000 O
DX
M
PERATING ANUAL