How To Adjust The State Of The Image - Panasonic PT-VX615N Operating Instructions Manual

1) Press the <INPUT SELECT> button on the control panel.
f The input guide is displayed.
2) Press the <INPUT SELECT> button again.
f Every time you press the <INPUT SELECT> button, the inputs are switched in the following order.
COMPUTER1 → COMPUTER2 → HDMI1 → HDMI2 → VIDEO → MEMORY VIEWER → MIRRORING →
Panasonic APPLICATION → DIGITAL LINK → COMPUTER1 → ...
f When the detailed input guide is displayed, you can select the input with the asqw buttons on the control
panel or on the remote control.
Note
f You can switch the detailed/simple input guide by setting the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] → [INPUT GUIDE].
f When the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] → [INPUT GUIDE] is set to [OFF], the input guide is not displayed.

How to adjust the state of the image

If the projected image or the position is not correct when the positioning of the projector and the screen is correctly
installed, adjust the projection angle, zoom, focus and vertical shift.
Focus lever
1) Adjust the projection angle.
f Place the projector on a level surface and make its front side parallel to the screen surface so that the
projection screen is rectangular.
f If the projector is facing downward with respect to the screen, extend the adjustable feet and adjust the
projected image so that the projected image is rectangular. For details, refer to "Adjusting adjustable feet".
Æ
( page 54)
2) Adjust the zoom and the focus. (Fig. 1)
f Operate the zoom lever to adjust the projected image size to fit the screen.
f Operate the focus lever to adjust the focus.
3) Adjust the vertical shift. (Fig. 2)
f Turn the vertical lens shift dial and adjust the vertical projection position on the screen. For details, refer to
"Adjusting the projection position with the optical axis shift function. (
Note
f It is recommended that the images are projected continuously for at least 30 minutes before the focus is adjusted.
f When the focus is adjusted, the projection screen size also changes slightly. Depending on the image projection situation, repeat Steps 1) to
3) to adjust to the best projection condition.
f Adjust from the [POSITION] menu → [SCREEN ADJUSTMENT] when the projected image is distorted.
Chapter 3 Basic Operations - Projecting
Zoom lever
Fig. 1
Vertical lens shift dial
Fig. 2
Æ
page 54)
ENGLISH - 53