Panasonic PT-VX615N Operating Instructions Manual page 52

f When switching inputs, the input guide for detailed or simple display is temporarily displayed. For the input
guide, refer to "Switching the input with the control panel" (
→ [ON-SCREEN DISPLAY] → [INPUT GUIDE].
Attention
f Images may not be projected properly depending on the external device, or the Blu-ray disc or DVD disc, to be played back. Set the
following menu items according to the input signal.
g [PICTURE] menu → [TV-SYSTEM]
g [PICTURE] menu → [RGB/YC
g [PICTURE] menu → [RGB/YP
g [PICTURE] menu → [RGB-SYSTEM]
f Confirm the aspect ratio of the projection screen and the image, and switch to an optimum aspect ratio from the [POSITION] menu →
[ASPECT].
Note
f For details on how to use the image transfer application software "Wireless Manager ME6.4" compatible with Windows computers and Mac,
refer to the Operating Instructions of "Wireless Manager ME6.4". "Wireless Manager ME6.4" is included on the supplied CD-ROM.
f For the using method of the image transfer application software "Plug and Share", which allows easy wireless connection by pairing the
commercially available USB memory with the projector, refer to the Operating Instructions of "Plug and Share" included in the supplied CD-
ROM. For the pairing between the projector and the USB memory, refer to "Using the Pairing function" (
is to write the image transfer application software "Plug and Share" and the connection information between the projector and the USB
memory to the USB memory.
f For details of the image transfer application software "Wireless Projector" compatible with iPad / iPhone / iPod touch and Android devices,
refer to the following URL.
https://panasonic.net/cns/projector/
f Set the [PROJECTOR SETUP] menu → [COMPUTER2 SELECT] to [COMPUTER2 IN] when a signal is to be input to the <COMPUTER 2
IN/1 OUT> terminal. When [COMPUTER2 SELECT] is set to [COMPUTER1 OUT], it cannot switch to COMPUTER 2 input.
f When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the <DIGITAL LINK/
LAN> terminal, the input on the DIGITAL LINK output supported device changes each time the <DIGITAL LINK> button is pressed. The input
can also be changed using the RS-232C control command.
For twisted-pair-cable transmitters of other manufacturers, switch the input on the projector to DIGITAL LINK, and then switch the input on
the twisted-pair-cable transmitter.
f If one of COMPUTER 1 / COMPUTER 2 / HDMI 1 / HDMI 2 input is selected and no signal is input, the following screen is displayed. Check
the output setting of your computer.
Switching the input with the control panel
The input can be switched with the <INPUT SELECT> button on the control panel
After pressing the <INPUT SELECT> button, the detailed or simple input guide is displayed.
52 - ENGLISH
Chapter 3 Basic Operations - Projecting
C ]
B R
P ]
B R
Detailed input guide example
Æ page 52) or the [DISPLAY OPTION] menu
Æ page 147). The pairing process
Simple input guide example