Controls And Indicators - Standard Horizon 30143X3D Owner's Manual

9 CONTROLS AND INDICATORS

This section defines each control of the transceiver. See Figures for lo-
cation of controls. For detailed operating instructions refer to section "10
BASIC OPERATION."
POWER SWITCH / VOLUME CONTROL ( VOL/PWR )
Turns the transceiver on and off as well as adjusts the audio volume.
Press and hold this knob for one second to turn the radio on. Clockwise
rotation of this knob increases the audio volume level.
Press and hold this knob for two seconds to turn the radio off.
SQUELCH CONTROL ( SQL )
Adjusting this control clockwise, sets the point at which random noise on
the channel does not activate the audio circuits but a received signal does.
This point is called the squelch threshold. Further adjustment of the squelch
control will degrade reception of wanted transmissions.
LARGE KEYPAD
[ 16/9 ] Key
Immediately recalls channel 16 from any channel location. Holding down
this key recalls channel 9. Pressing the [16/9] key again reverts to the
previous selected working channel.
Secondary use
Press and hold the [ 16/9 ] key then press the [ WX ] key to switch the
Channel Group.
Page 18
NOTE
FCC ID: K6630143X3D/IC ID: 511B-30143X3D
GX3000S
Vertex Standard Co., Ltd.