Table of Contents
Advertisement
Printer Setting Tool
Settings Tabs
Basic Tab
1 Disable these settings
When this check box is selected,
changed.
The settings in a tab where
addition, the settings in the tab will not be saved or exported when the [Save in Command File] or
[Export] command is executed.
To apply the settings to the printer or save or export them, be sure to clear the check box.
2 Auto Power Off
Specify the amount of time that passes before the printer turns off automatically.
Available settings: [None], 1/2/3/4/5/6/7/8/9/10/20/30/40/50/60 minutes
3 Exit Position (RJ-3150 only)
If RJ-3050 was selected for [Printer], this item is unavailable. Select the media output location.
Available settings: [Tear], [Peeler]
4 Command Mode
Select the printer's command format.
Available settings: [Raster], [ESC/P], [P-touch Template], [CPCL emulation], [CPCL Line Print
emulation]
5 Text Direction
Select the printing orientation.
Available settings: [Normal], [Inverted 180 Degrees]
This setting is applied only if the printer driver is not used. If the printer driver is used, the setting specified
in the printer driver will be applied.
1
2
3
4
5
6
7
8
9
10
appears in the tab, and the settings can no longer be specified or
appears will not be applied to the printer even if [Apply] is clicked. In
3
3
3
70
Advertisement
Table of Contents
Troubleshooting
