Table of Contents
Advertisement
TRUE
SPEC SERIES®: STR, STA & STG, ROLL-IN AND ROLL-THROUGH
MAINTENANCE, CARE, CLEANING
CLEANING THE CONDENSER COIL
When using electrical appliances, basic safety precautions should be
followed, including the following. Disconnect power to unit.
TOOLS REQUIRED
•
Phillips Screwdriver
•
Stiff Bristle Brush
•
Adjustable Wrench
STEP 1: Disconnect power to unit.
STEP 2: Remove all screws securing top screen to unit. See image 1.
STEP 3: Clean off accumulated dirt from the condenser coil and
the fan with a stiff bristle brush. After brushing the components off
vacuum all dirt residue from the coil, fan, and surrounding areas. See
image 2.
NOTE: If you cannot completely clean the condensing coil due to
its position, then the front louvered panel will need to be removed.
See Images 3 and 4.
•
Air Tank or CO2 Tank
•
Vacuum Cleaner
1
2
3
Rainshield removal, top screws.
5
Disconnect digital temperature control connections.
.
.
www
truemfg
com
4
Rainshield removal, bottom screws.
24
24
Advertisement
Table of Contents
