Step 7. Assemble The Surface Burners - Samsung NX58H5600 Installation Manual

3. If range is next to or between
cabinets, make sure the cooktop
(without the surface burner grates) is
level with the countertops.
4. Position an oven rack in the center
rack position.
5. Check the level of the range with
a carpenter level using the two
positions shown at right.
6. After the range becomes level, slide
the range away from the wall so that
the anti-tip bracket can be installed.

Step 7. Assemble the surface burners

Do not operate the surface burners without all burner parts in place.
CAUTION
1. Position surface burner heads on
top of the surface burner manifolds
as shown at right. The electrodes
will fit into the slot in the bottom of
the heads. Make sure the surface
burner heads are flat and parallel
with the cooktop.
2. Place the matching size caps on
top of each surface burner head.
The caps on Precise simmer burner (RR) and inside Dual Burner (RF) can be
interchangeably used.
(Install)NX58H56_DG68-00524A_EN+CFR.indb 33
Precise Simmer Burner (RR)
Flat surface
Concave line
Model NX58H5650WS
Model NX58H5600SS
installation instructions _33
08/02/2014 11:54:50