Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Synology SA3600
Summary of Contents for Synology SA3600
- Page 1 Synology NAS SA3600 Hardware Installation Guide...
-
Page 2: Table Of Contents
Expansion Unit Deployment and Topology Start up Your Synology NAS LED Indicator Table Chapter 3: System Maintenance Replace System Fan Replace Power Supply Unit (PSU) Initial Troubleshooting Guide Chapter 4: Install DSM on Synology NAS Install DSM with Web Assistant Learn More Synology_HIG_SA3600_20190808... -
Page 3: Chapter 1: Before You Start
Chapter Before You Start Synology NAS SA3600 is an enterprise server consisting of both system hardware and the software operating system, DiskStation Manager (DSM). This manual will guide you through all configuration aspects of your SA3600, including the hardware components, setup procedures, system maintenance, and initial troubleshooting instructions. -
Page 4: Synology Sa3600 At A Glance
1. Press to power on your Synology NAS. Power Button and Indicator 2. To power off the Synology NAS, press and hold until you hear a beep sound and the Power LED starts blinking. Displays the status of the system. For more information, see "LED Indicator Status Indicator Table."... -
Page 5: Hardware Specification
• Basic • JBOD • RAID 0 • RAID 1 Supported RAID Type • RAID 5 • RAID 6 • RAID 10 • Synology RAID F1 • FCC Class A • CE Class A • BSMI Class A Agency Certification •... -
Page 6: Optional Accessories
Optional Accessories With Synology accessories, you can customize your Synology NAS to fit different business environments without www.synology.com/compatibility worrying about compatibility and stability. Visit for more information. • Memory Module Model Name Picture Description 16GB DDR4-2666 ECC registered D4RD-2666-16G DIMM... - Page 7 • Rail Kit Model Name Picture Description RKS1317 Sliding rail solutions • Spare Part Model Name Picture Description Disk Tray (Type R7) 3.5"/2.5" drive tray FAN 80*80*32_6 System fan module PSU 500W-RP Redundant PSU module Module_2 PSU 500W-RP Redundant PSU set (cage x 1, SET_2 PSU module x 2) 7 Chapter 1: Before You Start...
-
Page 8: Safety Instructions
Safety Instructions Keep away from direct sunlight and away from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity. Place the product right side up at all times. Do not place near any liquids. Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or aerosol cleaners. -
Page 9: Chapter 2: Hardware Setup
• Rail mounting kit (please see the Optional Accessories section to find out the suitable rail kit for cabinet installation) Warning: We suggest mounting your Synology NAS on a cabinet before installing any drives since the heavy weight will increase the installation difficulty. Install Drives Please follow below steps for drive installation: 1 Open the drive tray. - Page 10 3 Insert the loaded drive tray into the empty drive bay. Note: Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly. 4 Push the handle inward to secure the drive tray. 5 Push the switch on the drive tray handle to the left to lock the drive tray.
-
Page 11: Install Memory Modules
To install the RAM module: 1 Shut down your SA3600. Disconnect all cables connected to your SA3600 to prevent any possible damage. 2 Remove the screw on the back of SA3600. Pull the rear top cover, and put it aside. Note: When you remove the rear top cover, sensitive internal components are exposed. - Page 12 3 Insert the new memory module in the slot: a Push the retaining clips on the slot out to the sides. b Align the notch on the gold edge of the module with the notch in the memory slot. c Push down on the memory module with firm and even pressure. The retaining clips will snap into position as the module is correctly inserted.
-
Page 13: Install Pcle Add-In Cards
Center. To remove the RAM Module: 1 Follow step 1 and 2 of the To install the RAM module section to shut down your SA3600, disconnect the cables, and then remove the rear top cover. 2 Cut the cable tie before removing the memory module. (The pre-installed memory module is cable tied to prevent loosening during delivery.) - Page 14 Put back and fasten the screw that you removed in step 3-a so as to secure the newly inserted card. 4 Repeat step 3 to install the other network interface card for your SA3600. 5 Put back the rear top cover by following step 4 of the To install the RAM module section.
-
Page 15: Install And Remove Rail Kits
Install and Remove Rail Kits Here we use RKS1317 as an example to illustrate how to install or remove the rail kits. For more information about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit. To install the rail kit: 1 To install the rail kit to the rack a Attach the rear end of the rail kit assembly to the rack. - Page 16 3 Align the fixing holes of the inner rail to the side of the chassis and slide backward to attach the inner rail. 4 With the help of another person, carefully align the inner rail to the outer rail assembly. 5 Pull and hold the front latch of the inner rail to unlock the inner rail, and push the chassis towards the rack.
- Page 17 To remove the rail kit: 1 To remove the chassis from the rack, hold the rail kit release tabs on the ear holders and pull out the chassis from the rack. 2 With the help of another person, carefully remove the chassis from the rack. Then, slide forward to remove the inner rail from the chassis.
-
Page 18: Expansion Unit Deployment And Topology
To connect RX1217sas/RX2417sas with SA3600: 1 Connect one end of the expansion cable to the SAS OUT port of your SA3600 and the other to the SAS IN port of RX1217sas/RX2417sas. Make sure the release band (in blue) of the cable faces rightward when plugging into the SA3600, and that of the cable faces upward when plugging into RX1217sas/RX2417sas;... -
Page 19: Start Up Your Synology Nas
Start up Your Synology NAS To start up your SA3600: 1 Connect one end of each power cord to the power ports located on the back of the SA3600 and the other end to a power outlet. 2 Connect at least one LAN cable to one of the LAN ports and the other end to your switch, router, or hub. -
Page 20: Led Indicator Table
Please try to restart your Synology NAS or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology Technical Support for help. -
Page 21: Chapter 3: System Maintenance
Chapter System Maintenance Replace System Fan If a system fan malfunctions, please see the instructions below to open the case of SA3600 and replace the malfunctioning fan. 1 Press the small buttons located on the sides of the SA3600. 2 Lift to remove the fan cover. - Page 22 3 Fans are numbered as indicated below. 4 Find the malfunctioning fan. Lift the fan upward to remove it. 5 Prepare a new fan, and slide it into the SA3600. Make sure the fan is aligned properly as illustrated below. 22 Chapter 3: System Maintenance...
-
Page 23: Replace Power Supply Unit (Psu)
• What should I do if my Synology NAS cannot recognize installed drives? • How do I know whether the problem is with my Synology NAS or drive when drive errors occur? • Memory • Are there any requirements for installing or expanding system memory capacity? How can I run a memory test on my Synology NAS? •... -
Page 24: Chapter 4: Install Dsm On Synology Nas
3 Enter either of the following into the address bar of your browser: find.synology.com synologynas:5000 4 Web Assistant will be launched in your web browser. It will search for and find the Synology NAS within the local network. The status of the SA3600 should be Installed. - Page 25 Section 5. License Limitations. The license set forth in Sections 1, 2 and 3 applies only to the extent that you have ordered and paid for the Product and states the entirety of your rights with respect to the Software. Synology reserves all rights not expressly granted to you in this EULA.
- Page 26 Arbitration Law and related enforcement rules of the country in which Synology Inc. was organized. In such cases, the arbitration will be limited solely to the dispute between you and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis.
- Page 27 Section 3. Limited Warranty and Remedies 3.1 Limited Warranty. Subject to Section 3.2, Synology warrants to the Customer that each Product (a) will be free of material defects in workmanship and (b) under normal use will perform substantially in accordance with Synology's published specifications for the Product during the Warranty Period.
- Page 28 Section 4. Limitations of Liability 4.1 Force Majeure. Synology will not be liable for, or be considered to be in breach of or default under this Warranty on account of, any delay or failure to perform as required by this Warranty as a result of any cause or condition beyond its reasonable control (including, without limitation, any act or failure to act by Customer).
- Page 29 Association, except as otherwise provided below. The arbitration will be conducted before a single arbitrator, and will be limited solely to the dispute between Customer and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis.
- Page 30 FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 31 この装置は、クラス A 機器です。この装置を住宅環境で使用すると電波妨 害を引き起こすことがあります。この場合には使用者が適切な対策を講ずる よう要求されることがあります。 VCCI 一 A...