Setting Up Your Product Using A Temporary Usb Connection - Epson L475 Installation Manual

Parent topic:

Setting Up Your Product Using a Temporary USB Connection

To add your product to a wireless network, you may need to know the name (SSID) and password of
your wireless network. If it has security enabled, you also need to know the WEP key or WPA
passphrase.
Note: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is
required to obtain the product software.
1. Make sure your product is turned on but NOT CONNECTED to your computer with a USB cable.
Note: With Windows, if you see a Found New Hardware screen, click Cancel and disconnect the
USB cable.
2. Insert the product CD or download your product's software package from
global.latin.epson.com/Support/L475.
3. Select your language and click Next (Windows), or click Continue and click Continue again (OS X).
4. Accept the software license agreement to continue with software installation.
Setting Up Your Product on a Wireless Network
27