Setting Up Your Product Using The Control Panel - Epson L475 Installation Manual

IMPORTANT: DO NOT TURN OFF YOUR PRODUCT OR INTERRUPT THE FIRMWARE SEARCH
PROCESS IN ANY WAY.
17. Follow the on-screen instructions to complete product setup. When you see this screen, click Exit
(Windows) or Close (OS X) to close the installation program.
Parent topic:

Setting Up Your Product Using the Control Panel

To add your product to a wireless network, you may need to know the name (SSID) and password of
your wireless network. If it has security enabled, you also need to know the WEP key or WPA
passphrase.
Note: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is
required to obtain the product software.
1. Make sure your product is turned on but NOT CONNECTED to your computer with a USB cable.
Note: With Windows, if you see a Found New Hardware screen, click Cancel and disconnect the
USB cable.
Setting Up Your Product on a Wireless Network
19