Advertisement
22
Solutions to Common Inquiries
Service Prevention Checklist
Before calling for service, review this list. It may save both time and expense. The list includes com-
mon occurrences that are not the result of defective workmanship or materials in this dryer.
OCCURRENCE
Dryer does not
start.
LED displays 'dn".
Dryer runs but won't
heat.
POSSIBLE CAUSE
Electrical power cord is not securely
plugged in or plug may be loose.
House fuse blown or circuit breaker
tripped.
Action of pressing start button on
"touch screen" style console not
recognized
Thermal limiter tripped.
Delay Start inadvertently activated
Door may be open. Unit will not oper-
ate with door open.
Dryer has been programmed to
temporarily perform a repeating demo
cycle.
There are 2 house fuses in the dryer cir-
cuit. If 1 of the 2 fuses is blown, the drum
may turn but the heater will not operate.
(electric models)
Gas supply valve is not open (gas
models).
Dryer does not have enough air sup-
ply to support the burner flame (gas
models).
LP gas supply tank is empty or there has
been a utility interruption of natural gas
(gas models).
SOLUTION
Make sure the plug fits tightly in wall outlet.
Reset circuit breaker or replace fuse.
Make sure electrical line is not overloaded
and the dryer is on a separate circuit.
Press start button with bare fingertip.
Call authorized service person for replace-
ment.
Ensure Delay Start not activated.
Ensure door is closed.
Reset the unit back to factory default settings
as described earlier.
Replace fuse.
Check to make sure supply valve is open.
See INSTALLATION INSTRUCTIONS for
procedure.
See INSTALLATION INSTRUCTIONS.
Refill or replace tank.
Dryer should heat when utility service is
restored.
Hide quick links:
Advertisement
