Advertisement
20
Care & Cleaning
Water Inlet Hose Inspection (Steam Models Only)
Periodically inspect all water inlet hoses for
water leaks, wear, cuts, corrosion and bulges.
Replace all hoses, if any sign of the above is
visible. All hoses should be replaced every
5 years to reduce the risk of hose failures.
When replacing hoses, refer to the Installation
Instructions for proper installation. Do not
overtighten or cross thread the fittings. Do not
allow the hose to rub against sharp objects.
Always ensure the hose fitting rubber gasket is
installed and free from water leaks when water
pressure is applied.
Instructions for Limited Use, Vacation, and Away from Home
IMPORTANT
Your dryer should be operated ONLY when
you are home. If you are away from home or
not using your dryer for extended periods of
time, follow these steps:
1. Turn off the water supply to dryer (steam
models only) to avoid water leaks due to
water pressure surges and unforeseen occur-
rences in the water supply.
2. Disconnect or unplug the electrical power to
the dryer.
Reconnecting Water Supply and Electrical
IMPORTANT
When reinstalling the dryer after disconnecting
the water supply lines (steam models only)
and electrical power, please follow the steps
below:
1. Review the Installation Instructions provided
with the dryer to ensure the appliance is level
and the water and electrical power supply is
properly connected.
2. Ensure the water lines are flushed of debris,
prior to connecting the water lines to the
dryer inlet.
3. Check for water leaks and replace supply
hoses if needed.
RUBBER WASHERS
MUST BE PRESENT
REPLACE HOSES EVERY 5 YEARS
Grounding type
wall receptacle
Do not, under
any circumstances,
cut, remove,
or bypass the
grounding prong.
Power cord with
3-prong grounded plug
Hide quick links:
Advertisement
