Table of Contents
Advertisement
Figure 4-7: Wireless Card Access List Setup
Click the Turn Access Control On check box.
4.
Click Add to add a wireless device to the wireless access control list. The Wireless Card
5.
Access Setup menu displays.
Then, either select from the list of available wireless cards the MR814 v3 has found in your
6.
area, or enter the MAC address and device name for a device you plan to use. You can usually
find the MAC address printed on the wireless adapter.
Note: You can copy and paste the MAC addresses from the firewall's Attached Devices menu
into the MAC Address box of this menu. To do this, configure each wireless computer to
obtain a wireless link to the firewall. The computer should then appear in the Attached
Devices menu.
Click Add to add this wireless device to the Wireless Card Access List. The screen changes
7.
back to the list screen. Repeat these steps for each additional device you wish to add to the list.
Be sure to click Apply to save your wireless access control list settings.
8.
Now, only devices on this list will be allowed to wirelessly connect to the MR814 v3.
Wireless Configuration
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
202-10039-01
4-13
Advertisement
Table of Contents
