Kyocera ECOSYS M3860idn Operation Manual page 425

Troubleshooting > Troubleshooting
T
Message
The cover is open.
The manufacturer
assumes no
responsibility for
damage caused by a
non-genuine toner.
The password does not
meet password policy.
The slit glass requires
cleaning.
This memory is not
formatted.
Toner is empty.
Toner is low. (Replace
when empty.)
U
Message
Unknown Toner
Installed. PC [K]
W
Message
Warning low memory.
Y
Message
You cannot use this box.
Job is canceled.
Checkpoints
Is the top cover of the document
processor open?
Is there any cover which is open?
Is the installed toner container our
own brand?
Is the password expired?
Is the password policy requirement
(such as password length or
required characters) changed?
—
Is the USB drive formatted by this
machine?
—
—
Checkpoints
Does the installed toner container's
regional specification match the
machine's?
Checkpoints
—
Checkpoints
—
10-26
Corrective Actions
Close the document processor
cover.
Close the cover indicated on the
screen.
We will not be liable for any damage
caused by the use of third party
supplies in this machine. If you want
to continue, select [Next].
Change the login password.
Job is canceled. Select Press
[End].
Confirm the password policy
requirements and change the login
password.
Job is canceled. Select Press
[End].
Clean the slit glass.
Perform [Format] on this machine.
Replace the toner container to our
specified toner container.
It is almost time to replace the toner
container. Obtain a new toner
container.
Corrective Actions
Install the specified container.
Corrective Actions
Cannot start the job. Try again later.
Corrective Actions
You cannot use the specified box.
Job is canceled. Select [End].
Reference
Page
―
―
page 9-5
page 9-5
page 10-3
page 7-11
page 10-6
―
Reference
Page
—
Reference
Page
—
Reference
Page
—