Kyocera ECOSYS M3860idn Operation Manual page 337

Setup and Registration (System Menu) > System Menu
Restart Network
Item
Restart Network
Proxy
Item
Proxy
Use Same Proxy
HTTP Proxy Server
HTTPS Proxy Server
No Proxy Domains
Optional Network
[System Menu/Counter] key > [System/Network] > [Optional Network]
Setup
Configure settings for the optional Wireless Network Interface Kit.
NOTE
This function is displayed when the Wireless Network Interface Kit (IB-51) is installed.
Item
Connection Status
Quick Setup
Available Network
Push Button Method
PIN Code Method
(Device)
PIN Code Method
(Terminal)
Restarts the network.
Specify the proxy settings.
Value: Off, On
Set whether or not the same proxy server is used for all protocols. If the same proxy server is
not used, select [Off].
Value: Off, On
Set a proxy server (HTTP).
Value: (Enter the proxy address and port number.)
Set a proxy server (HTTPS). This setup is available when [Use Same Proxy] is [Off].
Value: (Enter the proxy address and port number.)
Set domains for which no proxy is used.
Value: (Enter the domain name.)
You can check the wireless LAN status.
If the machine will connect to an access point that supports the automatic wireless network
setup, connection settings can be configured by Quick Setup.
Select access points to which the machine can be connected, enter the Preshared Key and
start a connection.
If the access point supports the push button method, wireless settings can be configured using
the push button. This setting executes push button, and the connection is started by pressing
the push button on the access point.
NOTE
The push button method supports only the WPS.
Starts connection using the machine's PIN code. Enter the PIN code into the access point. The
PIN code of the machine is automatically generated.
Starts connection using the PIN code of the access point. Enter the PIN code of the access
point.
8-40
Description
Description
Description