Kyocera ECOSYS M3860idn Operation Manual page 324

Setup and Registration (System Menu) > System Menu
Item
Paper Feed Mode
Auto cassette Change
Resolution
KIR
Printing Job Terminator
While printing from the computer, select how to feed paper when the paper source and type are
specified.
Value
Auto: Search the paper source that matches the selected paper size and type.
Fixed: Print on paper loaded in the specified paper source.
Select the following actions when the paper runs out in the paper source while printing.
Value: Off, On
NOTE
When selecting [Off], the machine displays "Add the following paper in cassette #." (# is a
cassette number) or "Add the following paper in the multi purpose tray.", and stops printing.
Load the paper according to the paper source displayed to resume printing.
To print from the other paper cassette, select [Paper Selection]. Select the desired paper
source.
When selecting [On], the machine continues printing automatically when the other cassette
contains the same paper as the currently-used cassette.
Set the resolution used for printing.
Value: 300 dpi, 600 dpi, Fine1200, Fast1200
NOTE
Settings that are received from the printer driver have priority over the operation panel settings.
Select the default KIR (smoothing) setting.
Value: Off, On
Set the condition to be regarded as the job end if the print job has not been processed to the
end due to the usage environment or for other reasons.
Value:
EOJ (End of Job): Up to the detection of a command indicating the end of job data is
regarded as one job.
End of Network Session: Data contained in one session of network connection is
regarded as one job.
UEL (Universal Exit Language): Up to detection of UEL at the end of the job is regarded
as one job.
8-27
Description