True GDM-7-S-LD Installation Manual page 17

True Food Service Equipment, Inc.
Info/Set Point
Button
LOCKING & UNLOCKING LAE CONTROLLER
WHY:
LOCKING OF CONTROL IS NECESSARY TO PREVENT
CHANGES TO PROGRAM THAT MAY AFFECT CABINET
OPERATION
HOW:
A. To change lock setting press and release the info button
. "t1" will appear. See image 1.
Press the up button until "Loc" appears.
See image 2.
B. While pressing and holding the info button press
the up or down button to change the lock
settings. If "no" appears, the controller is unlocked. If "yes"
appears, the controller is locked. See images 3 and 4.
C. Once the lock setting has been set correctly release the
info button .
Wait 5 seconds for the display to show temperature.
See image 5.
15
SAFETY INFORMATION
LAE Electronic Control
Manual Defrost/
Down Button
............ www.truemfg.com ............
Manual Activation/
Up Button
LAE Control Icons
Compressor
Running
Evaporator Fan
Running
Cabinet in Defrost
Activation of 2nd
Parameter Set - NA
Alarm - NA
Stand-By
Button
1
2
3
Image 3:
If "no" appears
on screen,
the controller
is unlocked.
4
Image 4:
If "yes" appears
on screen,
the controller
is locked.
5
15