Table of Contents
Advertisement
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver
software on a new computer which has never had a monitor driver installed before. This
instruction is only suitable for a computer which has never been used before, and for which the
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor
connected to it (and has monitor driver software installed), you should not be following these instructions. You
should instead be following the instructions for
1. Follow the instructions in
height adjustment stand) on page 11
stand on page
17.
When Windows starts, it will automatically detect the new monitor and launch the Found New
Hardware Wizard. Follow the prompts until it displays the option to Install Hardware Device
Drivers.
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check
Search for a suitable driver for my device
4. Check the option for CD-ROM drives (uncheck all others) and click
5. Look to confirm that the wizard has selected the correct name of your monitor and click
.
Next
6. Click
.
Finish
7. Restart the computer.
To find the suitable driver files for the purchased model, refer to the following table.
Driver files
RL2450H
RL2455
RL2455-Z
How to upgrade the monitor on an existing
How to assemble your monitor hardware (for models without
or
Assembling your monitor with a height adjustment
RL2450H /RL2450HT
RL2455HM
RL2455 / RL2455S / RL2455T / RL2455TS
option, and click
Next
Next
Suitable models
Getting the most from your BenQ monitor
computer.
.
.
25
Advertisement
Table of Contents
