Table of Contents
Advertisement
4. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the
other end to a power outlet just yet.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on
the monitor.
Turn on the computer too, and follow the instructions
in
Getting the most from your BenQ monitor on page
24
to install the monitor software.
To extend the service life of the product, we recommend
that you use your computer's power management function.
14
How to assemble your monitor hardware (for models without height adjust-
Advertisement
Table of Contents
