Selecting The Hdmi 4K Signal Format (4K Mode); Restoring The Default Settings (Init); Updating The Firmware (Update); Checking The Firmware Version (Version) - Yamaha RX-V383BL Owner's Manual

Selecting the HDMI 4K signal format (4K MODE)

LINK MASTER STEREO TUNED ZONE
SLEEP PARTY 2 A
OUT 2 Hi -R es ENHANCER YPAO VOL. A- DRC
ECO
4K MODE•MODE 1
Selects the format of signals input/output at the unit when HDMI 4K compatible TV and
playback device are connected to the unit.
Settings
Inputs/outputs 4K signals shown in the table below. Depending on the
MODE 1 connected device or HDMI cables, video may not be displayed correctly.
In this case, select "MODE 2".
MODE 2 Inputs/outputs 4K signals shown in the table below.
Note
When "MODE 1" is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with
Ethernet.
Format
RGB 4:4:4
YCbCr 4:4:4
4K/60, 50 Hz
YCbCr 4:2:2
YCbCr 4:2:0
RGB 4:4:4
4K/30, 25, 24 Hz YCbCr 4:4:4
YCbCr 4:2:2

Restoring the default settings (INIT)

LINK MASTER STEREO TUNED ZONE
SLEEP PARTY 2 A
OUT 2 Hi -R es ENHANCER YPAO VOL. A- DRC
ECO
INIT••••CANCEL
Restores the default settings for the unit.
Choices
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
3 B
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
MODE 1 MODE 2
8 bit 10 bit 12 bit 8 bit 10 bit
– –
4
– –
4
–
4
4 4
4 4
4 4
4 4
3 B
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR

Updating the firmware (UPDATE)

LINK MASTER
OUT 2
ECO
UPDATE•••••USB
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from our website. For details, refer
to the information supplied with updates.
n
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Save the downloaded firmware to the root folder of a USB memory
device.
2
Press PROGRAM on the front panel to select "UPDATE".
3
Connect the USB memory device to the USB jack.
12 bit
4
To start firmware update, press INFO on the front panel.

Checking the firmware version (VERSION)

–
–
LINK MASTER
–
OUT 2
ECO
VERSION••xx.xx
Check the version of firmware currently installed on the unit.
Note
It may take a while until the firmware version is displayed.
68
En
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -R es ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -R es ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR