Table of Contents
Advertisement
TG401xC(e).book Page 20 Thursday, January 14, 2010 1:29 PM
Programming
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 When the ringer volume is turned off, "Ringer off" is displayed and the handset
does not ring for outside calls. However even when the ringer volume is set to off,
the handset still rings for intercom calls and paging (page 25).
*3 If you subscribe to a distinctive ring service, select a tone (tone 1 to 5). If you select
a melody, you cannot distinguish lines by their ringers.
*4 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2007
Copyrights Vision Inc.
*6 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary.
*7 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*8 If you subscribe to a Call Display service and want to view the caller's information
after lifting up the handset to answer a call, turn off this feature.
*9 The handset can display the Internet address where you can download the
operating instructions or get further information for this product, using your
computer.
20
Advertisement
Table of Contents
