Gateway Solo 9500 User Manual page 245

21
Remove Disc 1 of the System Restoration Kit, then click
computer starts, a message asks you to change the display resolution
settings.
22
Click
OK
23
Select the desired color pallet from the
24
Slide the
setting.
25
Click
Test
26
If the test screen showed properly, click
- OR -
If the test screen did not show properly, click
the settings, then test again.
27
Click
OK
28
If required, go to "Reinstalling Windows NT 4.0 audio device drivers" on
page 237. Otherwise, go to "Reinstalling the Windows NT 4.0 Service
Pack" on page 244.
Reinstalling Windows NT 4.0 audio device drivers
Use the instructions in this section to reinstall the drivers that support the
audio devices in your computer.
To reinstall the Windows NT 4.0 audio device driver:
1
Make sure you ran the Windows NT 4.0 Locator utility to find the audio
device driver. For more information, see "Locating Windows NT 4.0
drivers" on page 233.
2
Place Disc 1 of the System Restoration Kit into your CD/DVD drive.
3
If the CD starts automatically, close the CD window.
. The Display Properties dialog box opens.
slider to adjust display resolution to your preferred
Desktop area
, then click to make sure your settings work properly.
OK
.
www.gateway.com
Reinstalling device drivers
. After the
Yes
list.
Color palette
.
Yes
and make changes to
No
237