Table of Contents
Advertisement
Raise the thumbscrew lid (
) and tighten the
thumbscrew as illustrated (
). Then push the lid
back.
1
2
Orient and align the stand arm with the monitor
(
), push them together until they click and lock
1
into place (
).
2
Carefully put down the stand and the base.
Gently attempt to pull the stand and the base back
apart to check that they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
To move the monitor, you must hold the handle and the
bottom of the stand base at the same time as illustrated.
12
How to assemble your monitor hardware
Advertisement
Table of Contents
