Samsung ProXpress C2620DW User Manual page 178

System Setup
Item
If the memory already has the same name when you
File Policy entered a new file name, you can rename or overwrite
it.
Held Job Timeout You can set the time to hold the temporarily stopped
job.
Imports data stored on a USB memory stick to the
Import Setting
machine (see "Backing up data" on page 48).
Exports data stored on the machine stick to a USB
Export Setting
memory (see "Restoring data" on page 49).
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
• 0 Sec: This option allows you to continue printing
when the paper size you have set is mismatched
with the paper in the tray.
Auto Continue
• 30 Sec: If a paper mismatch occurs, an error message
will display. The machine waits for about 30 second,
then automatically clear the message and continue
printing.
• Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
Description Item
Determine whether or not the machine continues
printing when it detects the paper does not match. For
example, if both tray 1 and tray 2 are filled with the
same size paper, the machine automatically prints from
tray 2 after the tray 1 runs out of paper.
Auto Tray Switch
Automatically substitutes the printer driver's paper size
to prevent the paper mismatch between Letter and A4.
Paper Substitution For example, if you have A4 paper in the tray but you
set the paper size to Letter in the printer driver, the
machine prints on A4 paper and vice versa.
Decides to use or not use the Auto Tray Switch feature
Tray Protection for a certain tray. If you set tray 1 to on, for example,
then tray 1 is excluded during tray switching.
Tray Mode • Dynamic: If you open and close the tray when a
paper mismatch occurs, the paper settings (size and
type) for that tray automatically change to the
settings required for the job. (When you open and
close the tray in the Dynamic mode, the machine
presumes that the paper in the tray was replaced
with the size and type required for the job.)
• Static: The tray settings do not change when you
open and close the tray.
Description
This option does not appear if you selected
Auto for Paper Source from printer driver.
3. Useful Setting Menus
178