Cleaning The Print Head Using A Computer Utility - Epson WorkForce WF-7710 User Manual

You see a screen like this:
6. Select Start to clean the print head.
When the cleaning cycle is finished, you see a message on the screen.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
7. Select Yes.
8. Select Start to print a nozzle check pattern and confirm that the print head is clean.
If you don't see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without
printing or longer if printing. Then try cleaning the print head again. If quality still does not improve,
contact Epson.
Parent topic:
Related tasks
Loading Paper for Documents in the Cassette

Cleaning the Print Head Using a Computer Utility

Cleaning the Print Head Using a Computer Utility
You can clean the print head using a utility on your Windows computer or Mac.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the cassette (or in Cassette 1 if your product has two cassettes).
Print Head Cleaning
250