WorkForce
545/645 Series
®
Start Here
Read these instructions before using your product.
1
Unpack
Phone cord
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
Caution:
Do not remove the plastic strip shown below. It is part of the
Automatic Document Feeder.
2
Turn on
1
Connect the power cord.
Caution:
Do not connect to your computer yet.
*412096300*
*412096300*
French control
panel sticker
(included for
Canada only)
Power cord
2
Raise the control panel and press the
To lower the control panel, squeeze the release bar
underneath.
Caution:
To avoid damaging your product, always squeeze the
release bar to lower the control panel.
3
Select settings
1
To select English as your language, press OK.
If you want to change the language, press
select it, then press OK.
2
Select your country/region and press OK.
3
Select Summer if Daylight Saving Time is in effect
(spring through summer); otherwise, select Winter.
Press OK.
4
Select the date format and press OK.
5
Press the number keys to enter the date and press OK.
6
Select the time format (12h or 24h) and press OK.
7
Press the number keys to enter the time. Then press
or
to select AM or PM, if necessary.
8
Press OK.
4
Install ink cartridges
1
Lift up the scanner.
On button.
or
to