Connecting Example: Av Equipment - Panasonic PT-RZ470EAW Operating Instructions Manual

Hide thumbs Also See for PT-RZ470EAW:
Table of Contents

Advertisement

<HDMI IN> terminal pin assignments and signal names
Outside view
Even-numbered pins of (2) to (18)
(2)
(18)
(1)
(19)
Odd-numbered pins of (1) to (19)

Connecting example: AV equipment

DVD player with HDMI terminal (HDCP)
Blu-ray disc player
Attention
f Always use one of the following when connecting a VCR.
g A VCR with built-in time base corrector (TBC)
g A time base corrector (TBC) between the projector and the VCR
f If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base corrector (TBC) between the
projector and the external devices.
f When inputting digital signals to the DVI-I terminal, use a commercially available cable with a ferrite core.
Note
f When a DVI digital signal is input, some external devices to be connected may require to switch the setting using the [DISPLAY OPTION]
menu → [DVI-I IN] → [EDID].
f The <DVI-I IN> terminal can be connected to HDMI- or DVI-I-compliant devices. However, images may not appear or may not be displayed
properly on some devices.
f For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards
is used, images may be interrupted or may not be displayed.
f The <HDMI IN> terminal of the projector can be connected to an external device with a DVI terminal by using an HDMI/DVI conversion
cable, but some devices may not project the image properly or function properly.
f The projector does not support VIERA Link (HDMI).
f If the [HDMI] and [DIGITAL LINK] settings in the [PROJECTOR SETUP] menu → [AUDIO SETTING] → [AUDIO IN SELECT] are incorrect,
the projector may have malfunctions such as the absence of audio.
30 - ENGLISH
Chapter 2 Getting Started — Connecting
Pin No.
Signal name
(1)
T.M.D.S data 2+
(2)
T.M.D.S data 2 shield
(3)
T.M.D.S data 2-
(4)
T.M.D.S data 1+
(5)
T.M.D.S data 1 shield
(6)
T.M.D.S data 1-
(7)
T.M.D.S data 0+
(8)
T.M.D.S data 0 shield
(9)
T.M.D.S data 0-
(10)
T.M.D.S clock+
Pin No.
Signal name
(11)
T.M.D.S clock shield
(12)
T.M.D.S clock-
(13)
CEC
(14)
(15)
SCL
(16)
SDA
DDC/CEC
(17)
GND
(18)
+5 V
(19)
Hot plug detection
VCR (with built-in TBC)
Audio device

Advertisement

Table of Contents
loading

Table of Contents