Remote Control - Yamaha YSP-5600BMK2 Owner's Manual

Digital sound projector
Table of Contents

Advertisement

Problem
Transmitting
Cannot make the
"Bluetooth" is set to "Off".
unit connected
"Transmission" is set to "Off".
to the Bluetooth
device.
Another Bluetooth device is connected.
The device does not support A2DP.
More than 20 devices are connected and the earliest connecting
information is deleted.
The unit and device are too far apart.
There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.
No sound is
The device is not set to send Bluetooth audio signals to the unit.
heard or the
The device's volume is set to minimum.
sound is
intermittent via
Transmitted audio does not play.
the Bluetooth
The unit and device are too far apart.
device.
There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.
The Bluetooth connection of the unit with the device is disconnected.
Attempted to establish a connection during playback with AirPlay.

Remote control

Problem
The remote control does not work
The wrong distance or angle.
and/or function properly.
Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this unit.
The batteries are weak.
Cause
Set it to "On".
Set it to "On".
Terminate the current Bluetooth connection, and connect to the device to
which audio should be transmitted.
Connect to a Bluetooth audio device that supports A2DP.
Connect to the device again. The unit is able to connect up to 20 Bluetooth
devices for receiving and transmitting audio. If a new device is successfully
connected to the unit after 20 other devices have already been connected,
the device with the earliest connecting date will have been deleted to make
room for the new device.
Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit
and connect the device to this unit.
Move this unit away from the device that is emitting radio frequency signals.
Check that the Bluetooth function of the device is set properly.
Turn up the volume level on the device.
Play audio from the device selected with the input selector key.
Move the Bluetooth device so that it is less than 10 m (33 ft) from this unit.
Move this unit away from the device that is emitting radio frequency signals.
Perform Bluetooth connection operations again.
Playback with AirPlay cannot be transmitted. Terminate AirPlay playback
and try again to establish a connection.
Cause
The remote control functions within a maximum range of 6 m (20 ft) and no
more than 30 degrees off-axis from the front panel.
Reposition this unit.
Replace all batteries.
Remedy
Remedy
APPENDIX ➤ Troubleshooting
See page
82
82
45, 48
105
45, 48
45, 48
48
45, 48
48
48, 63
See page
7
7
95
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ysp-5600

Table of Contents