Playing back music with AirPlay
The AirPlay function allows you to play back iTunes or iPod music on the unit via
network.
• This section describes "iPod touch", "iPhone" and "iPad" as the "iPod". "iPod" refers to "iPod touch",
"iPhone" and "iPad", unless otherwise specified.
iTunes
(wired or
wireless)
Router
iPod
• To use this function, the unit and your PC or iPod must be connected to the same router (p. 50). You can
check whether the network parameters (such as the IP address) are properly assigned to the unit in
"Information" (p. 78) in the setup menu.
• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to
connect. Connect the unit and iPod to the same SSID.
• The AirPlay function can be used with an iPhone, iPad, or iPod touch running iOS 4.3.3 or later, a Mac
running OS X version 10.8 "Mountain Lion" or later, or a Windows computer with iTunes 10.2.2 or later
installed.
(wired or
wireless)
The unit
Playback of iTunes/iPod music contents
Follow the procedure below to play back iTunes/iPod music contents on the unit.
1
Turn on the unit, and start iTunes on the PC or display the playback
screen on the iPod.
If the iTunes/iPod recognizes the unit, the AirPlay icon (
iTunes (example)
iPod iOS7/iOS8 (example)
• If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly.
2
On the iTunes/iPod, click (tap) the AirPlay icon and select the unit
(network name of the unit) as the audio output device.
iTunes (example)
YSP-5600 XXXX
Network name of the unit
NETWORKS ➤ Playing back music with AirPlay
) appears.
iPod iOS6 (example)
iPod (example)
YSP-5600 XXXX
En
63