Safety Information For The Installer - Furuno FCV-292 Operator's Manual

WARNING
Only qualified personnel
should work inside the
equipment.
This equipment uses high voltage
electricity which can shock, burn,
or cause death.
Turn off the power at the ship's mains
switchboard before beginning the
installation. Post a warning sign near
the switchboard to ensure that the
power will not be applied while the
equipment is being installed.
Serious injury or death can result if the power is
not turned off, or is applied while the equipment
is being installed.
iv
SAFETY INFORMATION
FOR THE INSTALLER
CAUTION
Ground the equipment to
prevent electrical shock and
mutual interference.
Ungrounded equipment can give
off or receive electro-magnetic
interference or cause electrical
shock.
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply can
cause fire or equipment damage. The voltage
rating appears on the label at the rear of the
equipment.
NOTICE
The mounting location must satisfy the
following conditions:
Away from rain and water splash
Out of direct sunlight
Away from air conditioner vents
Away from magnets and magnetic fields
Moderate and stable in temperature and
humidity