Oki C711cdtn User Manual page 42

USB Setup
This menu controls the operation of the printer's USB data interface.
ITEM
USB
Speed
Soft Reset
Offline Receive
Serial Number
When you have changed any settings in the USB menu, turn the printer OFF, then ON
again.
Security Setup
NOTE
This menu only displays if the optional SD card is installed.
ITEM SETTINGS
Job Limitation Off
Encrypted Job
Make Secure SD Execute
Card
Make Normal SD Execute
Card
SETTINGS
Enable / Disable
480 / 12 Mbps
Enable / Disable
Enable / Disable
Enable / Disable
EXPLANATION
Job limitation mode control.
Jobs other than specified ones are rejected.
SD Card encoding function is made effective.
At the same time, it initializes the SD card.
After execution, the following confirmation messages will appear.
Are You Sure?
Yes
No
If No is selected, the display will return to the previous menu.
If Yes is selected, the printer will be automatically rebooted and the
encoding function will become effective.
Display Conditions:
SD Card is installed, SD Card encoding function invalidity and
Storage Setup > Enable Initialization > Yes
SD Card encoding function is set to invalid.
At the same time, it initializes the SD card.
After execution, the following confirmation messages will appear.
Are You Sure?
Yes
No
If No is selected, the display will return to the previous menu.
If Yes is selected, the printer will be automatically rebooted and the
encoding function will become invalid.
Display Conditions:
SD Card is installed, SD Card encoding function invalidity and
Storage Setup > Enable Initialization > Yes
Menu functions > 42
EXPLANATION
ENABLES / DISABLES the USB port.
Selects the interface speed. After setting change the
menu, the printer restarts on exit.
Enables or disables the SOFT RESET command.
OFFLINE RECEIVE.
Specifies whether to ENABLE or DISABLE a USB serial
number.
The USB serial number is used to identify the USB device
connected to your PC.