Chapter 4
7. Click Save.
•
Allow Guest To Access My Local Network
local network and manage it.
•
Guest Network Isolation
•
Enable Guest Network Bandwidth Control
Bandwidth Control rules will take effect.
Note: The range of bandwidth for guest network is calculated according to the setting of Bandwidth Control on
the
Bandwidth Control
4. 8.
DHCP
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
- If enabled, guests are isolated from each other.
page.
- If enabled, guests can access the
- If enabled, the Guest Network
33