Wireless Advanced - TP-Link Archer C20 User Manual

Chapter 6
Done!
6. 6. 4.

Wireless Advanced

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless >
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select Enabled
4 ) Click Save
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
Wireless Advanced.
Configure the Router in Range Extender Mode
in the Status drop-down list.
and click Back.
99