Wireless Advanced - TP-Link Archer C20 User Manual

Chapter 4
Done!
4. 6. 5.

Wireless Advanced

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless >
3. Configure the advanced settings of your wireless network and click Save.
Note:
3. Click Enable
4. Select Allow the stations specified by any enabled entries in
the list to access
5. Delete all or disable all entries if there are any entries already.
6. Click Add New
1 ) Enter the
00:0A:EB:00:07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select Enabled
4 ) Click Save
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
Wireless Advanced.
to enable the Wireless MAC Filtering function.
as the filtering rule.
and fill in the blank.
MAC address
in the Status drop-down list.
and click Back.
00:0A:EB:B0:00:0B or
30