Maytag MTW5707TQ0 Use & Care Manual page 8

1. Remove power plug and yellow strap from machine base to release the rear leveling
system.
2. Firmly grasp the power cord and pull to completely remove the power cord, cord
restraint, and pin from the rear panel.
3. Confirm that the power cord restraint (A), and pin (B) are removed.
A
A. Power cord restraint
B. Pin
4. To remove the power cord from the cord restraint, push the power cord in, press TAB, and
then pull the power cord out.
8
B
Looped power cord
1. Firmly grasp the yellow shipping strap and pull until both ends are completely removed
from washer.
2. Check that two (2) cotter pins were removed with the shipping strap.
Looped power cord