Connecting The Device - Fujitsu P24W-7 LED Operating Manual

Connecting the device

Please observe the safety information in
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug from the computer.
Connecting cables to the monitor
The supplied data cables have two 15-pin D-SUB connectors or two 24-pin DVI connectors or
two 20-pin DisplayPort connectors for connection to the monitor and to the computer.
Information on the computer connections and interfaces is contained in the
operating manual for the computer.
1
2
1 = Security slot for "Security Lock"
2 = Power connector
3 = 0 W switch
4 = DisplayPort socket
5 = HDMI socket
6 = DVI-D socket (DVI)
► Select the appropriate data cable for your computer.
► Connect one of the data cable connectors to the DVI-D or DisplayPort socket on the
monitor and secure the DVI-D plug-in connection by tightening the safety screws.
Fujitsu
3 4 5
"Important notes", Page
6 7 8 9 10
7 = D-SUB socket (VGA)
8 = AUDIO-IN socket
9 = AUDIO-OUT socket
10 = USB 3.0 (Upstream)
11 = USB 3.0 (Downstream)
Getting started
7.
11
11
17