Table of Contents
Advertisement
Operation
Adjusting the volume
► Press the
button to open the Volume setting window.
► Press the
button or the
► Press the
button to activate/deactivate the mute function.
► Press the
button to close the menu.
Adjusting the brightness
► Press the
button to open the Brightness setting window.
► Press the
button or the
► Press the
button to close the menu.
Performing auto-adjustment of the monitor
This function is only intended for analogue image transmission (VGA).
► Press the
AUTO
The Auto Processing message appears.
Picture quality and position are set to optimum values for your system.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the
with the ON/OFF switch or the ON/OFF touch sensor.
The message OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Locking the ON/OFF button or ON/OFF touch sensor
The ON/OFF button or ON/OFF touch sensor can be locked to prevent accidental
or unauthorised changes to the screen settings.
► Press the
ECO
The message Power button locked / unlocked is displayed.
In order to unlock the ON/OFF button or ON/OFF touch sensor, do the same again.
28
button to set the desired volume for the built-in speakers.
button to set the desired brightness.
button for about 1 second.
MENU
button for a few seconds while you switch on the monitor
button and
INPUT
button at the same time for a few seconds.
Fujitsu
Advertisement
Table of Contents
