Epson ET-2750U User Manual page 172

Table of Contents

Advertisement

LCD screen message
Condition/solution
Printer is offline. Check
The product has not been connected to the Internet for an extended period of
your Internet connection
time. Make sure the product is connected to a network with Internet access.
to maintain the
ReadyPrint service.
LCD code
Condition/solution
(E-01)
A printer error has occurred. Turn the product off and then back on again. If the error
continues, check for a paper jam. If there is no paper jam, contact Epson for support.
(E-02)
A scanner error has occurred. Turn the product off and then back on again.
(E-11)
The ink pad needs to be replaced. Contact Epson for support.
(W-01)
Paper is jammed in the product. Remove the jammed paper, then press the button
indicated on the LCD screen to clear the error. If the error continues, turn the product
off and back on again.
(W-11)
An ink pad is nearing the end of its service life. Contact Epson for support. (To
continue printing, press the
(I-22)
To establish a wireless connection using an access point, press the button on the
access point or click the button on the access point's wireless settings screen
displayed on your computer screen.
(I-23)
Enter the PIN code displayed on the LCD screen into the access point or computer
within two minutes. If you wait longer than two minutes, a time-out error occurs, the
code changes, and you must enter a new code.
(I-31)
To make wireless connection settings from your computer, run the installer and follow
the on-screen instructions.
(I-41)
The Paper Setup Auto Display option is disabled. You must enable Paper Setup
Auto Display to use AirPrint.
(I-60)
Your computer may not support WSD (Web Services for Devices). The Scan to PC
(WSD) function is available only for computers running English versions of Windows
10, Windows 8.x, Windows 7, or Windows Vista.
Recovery Mode A firmware update has failed. Connect your product using a USB cable and try
updating the firmware again. If you still receive this error message, contact Epson for
support.
start button.)
172

Advertisement

Table of Contents
loading

Table of Contents